Precision Surface Grinding Machine
Model: MX-614/618
Table Size: 150x350 (6x14")/ 150x450 (6x18")
Max. Grinding Length: 370mm (14-3/4")/ 470mm (18-3/4")
Max. Grinding Width: 160mm (6-1/3")/ 160mm (6-1/3")
Distance From Table Surface To Spindle Center: 400mm (15-3/4")
Permanent Magnetic Chuck: 150x300mm (6x14")/ 150x460mm (6x18")
Wheel Size (Dia x Width x Bore): 180x16x32mm (7"x2/3"x1-1/14")
- Fast Delievery
- Quality Assurance
- 24/7 Customer Service
Product Introduction
MX-614/618 series precision centerless grinding equipment is mainly used for through-grinding of various cylindrical parts, annular parts, and long bars; cutting-in grinding of cones with a taper less than 1:20 and various molded rotating parts.
MX-614 Parameters
MX-618 Parameters
Machine Features
* The main castings of this precision surface grinding machine are made of cast iron. After annealing, the internal stress is eliminated to ensure high precision, and high rigidity, and to prolong the life of the machine.
* Wear-resistant resin sheet is affixed to the slideway of the precision surface grinder machine, and after precision scooping, it not only slides smoothly and is wear-resistant, but it is most suitable for molding and grinding.
* This precision surface grinding machine adopts Taiwan's direct-coupled spindle and P4-grade super-precision roller bearings. It has low noise, high vibration, and high torque at high speeds. It is most suitable for molding and grinding.
Technical Parameters
|
Model |
MX-614 |
MX-618 |
|
|
Processing Capacity |
Table Size |
150x350 (6x14") |
150x450 (6x18") |
|
Max. Grinding Length |
370mm (14-3/4") |
470mm (18-3/4") |
|
|
Max. Grinding Width |
160mm (6-1/3") |
160mm (6-1/3") |
|
|
Distance From Table Surface To Spindle Center |
400mm (15-3/4") |
400mm (15-3/4") |
|
|
Permanent Magnetic Chuck |
150x300mm (6x14") |
150x460mm (6x18") |
|
|
Left And Right Feed |
Manual Stroke |
360mm (15") |
460mm (19") |
|
Front And Back Feed |
Manual Feed (Per Scale) |
0.02mm (0.0005") |
0.02mm (0.0005") |
|
Manual Feed (Per Revolution) |
5mm (1/5") |
5mm (1/5") |
|
|
Up And Down Feed |
Manual Feed (Per Scale) |
0.005mm (0.0002") |
0.005mm (0.0002") |
|
Manual Feed (Per Revolution) |
1mm (0.05") |
1mm (0.05") |
|
|
Wheel |
Wheel Size (Dia x Width x Bore) |
180x16x32mm (7"x2/3"x1-1/14") |
180x16x32mm (7"x2/3"x1-1/14") |
|
Spindle Speeds (60C/50C) |
3600/3000rpm |
3600/3000rpm |
|
|
Motor |
Spindle Motor |
1.5HP 60HZ/3600rpm |
1.5HP 60HZ/3600rpm |
|
Weight |
Gross |
690kgs (1518lbs) |
850kgs (1870lbs) |
No Information
